Search: Advanced search
 
Printable version 
Categories Categories
Shop by Brand
Paints & Stains
Painting Tools
Paint Remover & Strippers
Solvents/Cleaners
Patching Materials
Tapes & Adhesives
Paint Sprayers & Accessorios


Bestsellers Bestsellers
1. MINWAX 11003 3 BLEND-FIL SIZE:PENCIL
2. MINWAX 32240 SPECIAL WALNUT 224A STAIN SIZE:11.5 OZ. SPRAY.
3. MINWAX 33060 SATIN POLYURETHANE SPRAY SIZE:11.5 OZ. SPRAY.
4. MINWAX 11005 5 BLEND-FIL SIZE:PENCIL
5. MINWAX 21350 SATIN ROYAL WALNUT 350 POLYSHADES SIZE:1/2 PINT.


Manufacturers Manufacturers
3M
Absolute Coatings
Advance Protective Products
Akzo Nobel Paints LLC
Allway Tools
American Safety Razor
ASM
Cabot Stain
Convenience Products
Daich Coatings

Other manufacturers...


Special Special
Gift certificates


Help Help
Contact us
Privacy statement
Terms & Conditions
Sitemap
About Us
Tips for Painting

Paint Store :: Shop by Brand :: Minwax :: MINWAX 71090 GLOSS HIGH BUILD POLYURETHANE 350 VOC SIZE:1 GALLON.

MINWAX 71090 GLOSS HIGH BUILD POLYURETHANE 350 VOC SIZE:1 GALLON.
MINWAX 71090 GLOSS HIGH BUILD POLYURETHANE 350 VOC SIZE:1 GALLON. 

Minwax® High Build Polyurethane is a clear, oil-based, durable protective finish that is specially formulated to provide long-lasting beauty and protection with just two coats.

DIRECTIONS:

For project application:

1.Surface must be dry and free of paint, wax, grease, polish, dirt, old finishes in poor condition or other foreign matter.
2.Sand to obtain a smooth, uniform surface. Remove all dust and wipe with a cloth dampened with mineral spirits.
3.If desired, apply stain, such as Minwax® Wood Finish™ or Minwax® Gel Stain to bare wood following all label directions. Wait 8 hours before applying Minwax® High-Build Polyurethane over stain.
4.Stir High-Build Polyurethane before use to eliminate settling on the bottom of the can. DO NOT SHAKE.
5.Apply a THIN coat of High-Build Polyurethane using a high quality natural bristle or foam brush. Let dry at least 4-6 hours.
6.Lightly sand entire surface with 220-grit sandpaper. Remove all dust and wipe with a cloth dampened with mineral spirits.
7.Apply a second coat following directions in Steps 4 & 5.
8.Only two coats are required to achieve optimal film build and durability. If a third coat is desired, wait at least 12 hours and repeat Steps 6 & 7.
9.Allow 24 hours before light use.

For floor Application:
For new, stripped or unfinished floors

1.Surface must be dry and free of paint, wax, grease, polish, dirt, old finishes in poor condition or other foreign matter.
2.Sand using 100-grit sandpaper to obtain a smooth, uniform surface. If floor is not going to be stained, sand again using 120-grit. After each sanding, remove all dust and wipe floor with a cloth dampened with mineral spirits.
3.If desired, apply Minwax® Wood Finish™ or Minwax® Sanding Sealer to bare wood following all label directions. Wait 8 hours before applying Minwax® High-Build Polyurethane over Minwax® Wood Finish™ and 2 hours over Minwax® Sanding Sealer.
4.Stir High-Build Polyurethane before use to eliminate settling on the bottom of the can. DO NOT SHAKE.
5.Apply a thin coat using a lambswool or synthetic pad applicator. Maintain a wet edge to avoid lap marks. Ensure that the surface is evenly and entirely covered.
6.Wait 12-18 hours before sanding. Low temperature or high humidity will extend dry time. Check the surface to ensure it is not tacky to the touch before sanding.
7.For best results, use an orbital floor buffer with a maroon buffing pad specifically designed for sanding between coats. Do not use a belt or drum-type sander for sanding between coats. If sanding produces tacky or gummy residue, stop sanding immediately and wait until surface is no longer tacky to the touch. Remove all dust and wipe floor with a cloth dampened with mineral spirits.
Note: Sanding residue should be dry and powdery. If sanding residue is gummy or sandpaper, screen or pad clogs, stop sanding and allow additional dry time. Remove all sanding residue and follow precautions for safe disposal located on the cautionary panel. Accumulated sanding residue may spontaneously catch fire if not immediately disposed of in a sealed, water-filled metal container. Over-application, low temperature and high-humidity will increase cure time and may increase the risk of spontaneous combustion of the sanding residue.
8.Apply second coat following directions in Steps 4 & 5.
9.Only 2 coats are necessary to achieve optimal film build and durability. A third coat is NOT recommended. If a third coat is applied, wait at least 3-4 full days after the second coat. Sand and apply third coat following directions above.

To Sand and Recoat a Floor

1.Sand floor using 120-grit sandpaper. Remove all dust and wipe with a cloth dampened with mineral spirits.
2.Apply a thin coat using a lambswool or synthetic pad applicator. Maintain a wet edge to avoid lap marks. Ensure that the surface is evenly and entirely covered.
3.Only 1 coat is necessary to achieve optimal film build and durability. A second coat is NOT recommended. If a second coat is applied, wait at least 3-4 full days after first coat then sand and apply the finish following Steps 7 & 8 under “For new, stripped or unfinished floors” section.
Floors will accommodate light foot traffic 18-24 hours after the final coat. Avoid heavy traffic and wait to replace furniture for at least 72 hours after the final coat. When replacing furniture, do not slide. Do not clean floors or replace rugs for seven days.

Clean Up: For easy clean-up use mineral spirits or paint thinner.

Coverage: Approximately 400-500 square feet per gallon.

Note: Dry times are based on good ventilation, temperature of 77°F and 50% relative humidity. Lower temperature, higher humidity, lack of ventilation or application of thick coats will extend dry time. Slight ambering may be experienced when polyurethane is applied over light-colored wood surfaces. Always spot test on an inconspicuous area to ensure satisfactory results. For light-colored wood surfaces, we recommend protecting with Minwax® Polycrylic® Protective Finish.

 
   

  48%

Details
 
SKU 2742671090
Quantity in stock 1000 item(s) available
Weight 12.00 lbs
Retail Price: $78.23
Our Price: $41.07

Options
 
Quantity

Add to cart
        


 

Send to friend
Your name: *
Your e-mail: *
Recipient's email: *

Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page):

Get a different code
The code is case-sensitive and must be entered exactly as above.

Send to friend
 

Recommended products list
Customers who bought this product also bought the following products:  

 
 

Your cart Your cart
Cart is empty
 

View cart
Checkout
Orders history


Authentication Authentication
Username

Password

Log in 
Register 
Recover password

If Javascript is disabled in your browser click here


News News


 


Popular Categories

Tapes

Spray Paint

Paint Brushes

Paint Tools

Caulk and Sealants

Paint Remover & Stripper

Hand Tools

Interior Paint

Exterior Paint

 

Popular Brands

ZAR

Valpar

Cabot

DAP

3M

ASM

 

Hammerite

Modern Masters

 

Best Seller Products

Duct Tape

Black Paint

White Paint

Blue Paint

Red Paint

Dap Plus

Chalk Board Paint

Gold Paint

Aluminum Paint

 
 

We accept major credit cards

credit cards logo
 
Home | Store | About Us | Search | Terms & Conditions | Privacy Statement | Contact Us | Directory | Site Map | News | Paint Store Blog
 
SEO by site SEO
 
 

CONNECT WITH US
Copyright 2005-2015 Paint Store - All Rights Reserved